IOCELL Networks 351UNE Manual de usuario descargar pdf (Pagina 40)

IOCELL Networks NetDISK User Manual Network Direct Attached Storage / NDAS

7.2 NDAS Bind Management

You can run the NDAS Bind Management tool from Windows Start > Programs >

NDAS Software > NDAS Bind Management menu. You can create, remove and

configure NDAS bind using this tool and you can also check current status of the bind

from it. Select an NDAS device or bound units and use the menu options or right click

and see the available operations.

7.3 Before binding

All NDAS devices to be used must be registered with the write key and must be online

status. They must not be mounted on any PCs including the PC which performs the bind

operation. Make sure that all NDAS devices to be bound show Ready in the status. If

the device shows In use, check which PC has mounted the device using the Properties

menu and Hosts tab and then dismount the device from the PC. Then press Refresh

button or F5 key to refresh the NDAS Bind Management Window.

NOTES:

• Creating bound disks will eliminate previous data, except in the case of Adding a

Mirror to an NDAS Device.

• Do not Add a Mirror to a completely full hard drive. Some disk space will need to

be secured for writing system bind information.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Sin comentarios

IOCELL Networks 351UNE Manual de usuario Pagina 40